PUMP & MOTOR TEST STANDS
Hydraulic Pump & Motor Test Systems
Fully automated hydraulic testing solutions for pumps
and motors engineered for precision, repeatability,
and efficiency.
Overview
Technics Assembly & Test designs and manufactures advanced hydraulic pump
and motor testing systems for production, laboratory, and repair applications.
Our systems support open-loop, closed-loop, and bi-directional operation with
advanced automation for fast, safe, and accurate testing.
Key Features
Fully Automated Test Sequences
Pressure Capacity Up to 6,000 PSI
Speed Capability Up to 8,000 RPM
Power Handling Up to 1000 HP
Open & Closed Loop Testing
Accurate Case Drain Flow Measurement
Vision Systems for Leak Detection
Vibration & Temperature Monitoring
Barcode Scanning Integration
Advanced Report Generation & Control
Technical Capabillties
Parameter
- Pressure
- Speed
- Power
- Torque
- Operation
- Temperature Control
- Data Acquisition
- Fitration
Capability
- Up to 6,000 PSI
- Up to 8,000 RPM
- Up to 1000 HP
- Open Loop/Closed Loop/Bi-directional
- Integrated Closed Loop
- Integrated
- Multi-stage with particle counter
- Fitration
Safety Featurrs
- Interlocked safety doors
- Safety high-pressure relief valves
- High-speed shutoff valve
- Impact-resistant safety shield
- Emergency stop circuitry
- Soft start/soft stop motor control
- Sump pump for oil recovery
- Intelligent alarms & warnings
Additional Details
Technical Data
The HPU runs the following tests:
- End-stroke leakage tests for pressures up to 7250 psi
- Mid-stroke (or any stroke position) leakage test
- Integrity and cycle tests up to 7250 psi
- Adjustable air tests up to 290 psi
- Stress Tests
Features:
- Variable displacement pump capable of delivering up to 100 gallons per minute and reaching a maximum pressure of 7250 psi.
- The pump is driven by an electric motor that operates at 1450 rpm.
- 8 decibels-rated sound insulated cabinet with four large doors for ease of access.
- Kidney loop filtration unit
- Heat exchanger for hydraulic cooling and heating
- Particle counter
- Complete set of sensors and gauges
- Dedicated HMI with touch screen
- Integrated pneumatic system that empties cylinders of oil after hydraulic tests.
- Equipped with hoses and quick couplers to easily connect to cylinder ports.
Full Description
- Min-testing pressure
- Max-testing pressure
- Capacity of hydraulic power unit tank
- Supply Voltage
- Electrical power installed
- 5 Bar
- 500 Bar
- 800 L
- 400 V 60 Hz
- 25 kW
- 72.5 Psi
- 7250 Psi
- 211 Gallons
- 480 V 60 Hz
- 25 kW
Automation & Data Acquisition
- LabVIEW based DAQ systems
- Real-time data acquisition
- High speed charts & graphs
- Automated test sequences
- Automatic report generation (PDF/Excel)
- Data storage on local drive or network
- ERP/MES integration
- Remote access & monitoring
- Barcode scanning
- Vision systems for leak detection
Additional Details
Technical Data
- Min-testing pressure
- Max-testing pressure
- Capacity of hydraulic power unit tank
- Supply Voltage
- Electrical power installed
- 5 Bar
- 500 Bar
- 800 L
- 400 V 60 Hz
- 25 kW
- 72.5 Psi
- 7250 Psi
- 211 Gallons
- 480 V 60 Hz
- 25 kW
Full Description
The HPU runs the following tests:
- End-stroke leakage tests for pressures up to 7250 psi
- Mid-stroke (or any stroke position) leakage test
- Integrity and cycle tests up to 7250 psi
- Adjustable air tests up to 290 psi
- Stress Tests
Features:
- Variable displacement pump capable of delivering up to 100 gallons per minute and reaching a maximum pressure of 7250 psi.
- The pump is driven by an electric motor that operates at 1450 rpm.
- 8 decibels-rated sound insulated cabinet with four large doors for ease of access.
- Kidney loop filtration unit
- Heat exchanger for hydraulic cooling and heating
- Particle counter
- Complete set of sensors and gauges
- Dedicated HMI with touch screen
- Integrated pneumatic system that empties cylinders of oil after hydraulic tests.
- Equipped with hoses and quick couplers to easily connect to cylinder ports.
